The letters are seperate stencils with positioning marks.
For individual letters Click Here
The stencil is available in 6 sizes, select the size from the drop down above.
The font six is based on the height of the x in the case you choose.
Select a font from the list
If you would like a different font or size contact us
The stencils are produced in reusable mylar (120 micron).
How To Apply A Stencil
Step 1 – Secure the stencil in place. Use either low tack painters tape or spray the back of the stencil with adhesive. Leave the adhesive to dry for 2 minutes before positioning the stencil.
Step 2 – Use a stencil (round headed ) or Paint brush and load the brush with paint, then remove paint until the brush is nearly dry.
Step 3 – Apply a light coat of paint by stippling (light dabs of the paint brush to the surface) working from the centre out.
Step 5 – Build up the layers of paint until you have the coverage you like. Use the brush lighter at the edges to reduce seepage.
Step 6 – For designs where you are repositioning the stencil, remove the stencil and wipe the edges then re apply.